Montage de la pompe solaire 3TSS/4TSS

Pompe 3TSS et 4TSS solaire

Ces produits sont principalement utilisés dans la région sèche pour l'irrigation de l'agriculture, il peut être utilisé pour l'eau potable et eau vive. La condition de vie pourrait être beaucoup améliorée. Il peut également être utilisé pour des fontaines.

1.APPLICATION AREA:

This project products are mainly used in dry region for irrigation of agriculture, It can be used for drinking water and

living water. The living condition could be much improved. It also can be used for fountains.

2.MATERIAL OF PARTS:

Outlet: stainless steel

Pump body: stainless steel

Motor body: stainless steel

Bearing: C&U

3.ADVANCED TECHNOLOGY:

1.Application innovation

Compared with the traditional alternating current machine, the efficiency is improved 25% by the permanent magnetism, direct current, brushless, non-sensor motor.

2.Technics innovation

Adopt double plastic package for rotor and stator, motor insulation≥300MΩ, the motor security was much improved.

3.Structure innovation

Oil filling, convenient installation and environmental protection

4.HIGHLIGHTS

a.Energy-saving and environment-protected green products

b.High technique products adopting MPPT and DSP chip technique.

c.100% copper wire, cold-rolled silicon steel sheet

d.CE certificate

e.Advanced three phase brushless DC motor

f.Stainless steel 316 screws

g.3 years warranty

5.PRINCIPLE OF OPERATION:

Solar panel collects sunlight→DC electricity energy → solar controller(rectification,stabilization,amplification,filtering)→available DC electricity→(charge the batteries)→pumping water

6.ADVANTAGES OF SOLAR PUMP SYSTEM:

A.It is easier and more widely used than any other dynamoelectric driven pumps.

B.It is more economical and more environmentally friendly.

7.MODEL SELECTION:

a.The power of solar panel = power of pump ×1.3

The voltage of solar panel = the voltage of pump

The controller should be matched

b.Select the batteries according to the following formulas:

The use hour of battery =

The battery capacity ÷(the machine power÷the battery voltage)×0.6 For example,the machine power is 200W, the battery

capacity is 100AH,the voltage is 12V,and the battery is fully charged,then the use hour is:100÷(200÷12)×0.6=3.6hours

c.The battery capacity= 

--------------------------------------------------------------------

Pompe 3TSS/4TSS:

Paramètre du système:

Caractéristiques:

------------------------------------------------------------------------

Montage des Controls de la pompe: